In this guide 7 sections
Understand what is happening first
Balancing checks balance, not wheel alignment. Deviation appearing afterwards requires reviewing what actually changed during wheel servicing.
Safety decision before inspection
If deviation is strong or severe shaking starts after servicing, stop safely and request mounting checks before continuing.
Observations that help identify the direction
- Mention changed tyre positions or pressures and any new parts fitted with balancing.
- Distinguish an off-centre steering wheel while travelling straight from the vehicle itself pulling sideways.
What should you request from the specialist?
Start with the information that distinguishes the symptom
Return to the centre for checks of fitting, pressure, tyre condition and correct orientation.
Evidence before component replacement
Measure alignment and review suspension components when needed, explaining any fault before adjustment.
Avoid this action
Do not adjust one side's pressure to compensate or assume balancing weights alone explain pulling.
Questions to help you decide
Should I reposition the steering wheel myself to straighten it?
No. Correcting its position does not replace identifying the deviation's cause and performing proper adjustment.
Read the expanded explanation
Prepare the model name, year, engine and transmission type before visiting the workshop. Inspection procedures and specifications vary; do not transfer another vehicle's result to yours.
Sources and scope of this guide
Prepared editorially for 2uto using the following references on 12 September 2026. The observations organise the problem description and do not establish a cause without inspection.
Your vehicle manual takes priority. Dismantling, pressure, electrical and lifting procedures belong with a specialist; examples from a particular manufacturer do not apply universally.