2uto
GermanyEnglish
Language and country

Make yourself at home.

Language

Vehicles and prices follow your selected country.

Knowledge / 2uto

TPMS tyre-pressure light: check before resetting

TPMS illumination may mean low pressure, while flashing followed by steady illumination may indicate a monitoring fault. Measure pressure before clearing the warning.

Editorially reviewed 2 min read
In this guide 6 sections
Read the signal • choose your next step

Inspect the tyres in a safe place

With vibration, visible damage or major pressure loss, do not continue on the tyre. Use assistance or an alternative as permitted by the manual.

What does this light mean?

The symbol resembles an open tyre with an exclamation mark. The system warns about pressure but does not replace regular measurement or detect every type of damage. Instructions differ between direct and indirect monitoring.

Steady light

Measure tyre pressures when cold and set them according to the vehicle placard and load. Do not use the maximum sidewall pressure as the recommended operating pressure.

Flashing, then steady

This may indicate a monitoring-system fault. Check pressure manually and consult the manual to arrange inspection; do not assume every tyre is sound because the system is faulty.

Practical steps before inspection

  1. Note any tyre that loses pressure again; repeated inflation requires investigating the cause.
  2. Do not release air from a hot tyre simply because its reading exceeds the recommended cold pressure.
  3. Perform calibration or save pressures only after correct adjustment and using your vehicle's procedure. Do not save a low pressure to hide the warning.

A question that changes the decision

If the light disappears after driving, is measurement unnecessary?

No. Temperature changes can alter pressure and warning appearance; check when cold instead of relying on the symbol disappearing.

Guides related to this signal

Uneven tyre wear: read the pattern and investigate the cause

How to spot differences in wear and understand pressure, alignment and balancing without diagnosing from a photograph alone.

TPMS tyre-pressure light: causes and solutions

TPMS warns of low pressure or a system problem depending on the illumination pattern and model.

Sources and scope of this guide

Prepared with reference to the sources below on 12 September 2026. Manufacturer recommendations are examples for their models; your vehicle manual and display message take priority.

The icon is illustrative and may differ from your vehicle's. This explanation helps you take an initial step; it is not a remote diagnosis or permission to continue driving. Do not open the page or photograph the display while driving.

From knowledge to the next step

Continue on the road that suits you.